Length: 2 days (16 Hours)
Digital Badge Available
Course Description
The Allegro® PCB Editor Intermediate Techniques course gives you a deeper understanding of the software and includes features and tips. You apply constraints, autoroute high-speed designs, and work with differential pairs. In this course, you also explore high-speed design rules, create areas in your design that require different routing rules, and generate testpoints. In the task-oriented labs, you use a combination of interactive and automatic tools.
This is the second in a two-course series. You need to complete the Allegro PCB Editor Basic Techniques course before taking this one or have the equivalent work experience.
This course requires the SPB17.4-2019QIR2(S013) software or later.
Learning Objectives
After completing this course, you will be able to:
- Work with split planes
- Use the Constraint Manager efficiently
- Autoroute high-speed designs
- Create rules and route differential pairs
- Perform interactive bus routing
- Perform advanced interactive and automatic routing of critical nets
- Generate testpoints
- Place parts based upon design-for-assembly rules
- Write extract programs
- Use existing SKILL® programs in the PCB Editor
- Create designs with split and complex power planes
- Use the automatic glossing routines
Software Used in This Course
- Allegro PCB Designer
Software Release(s)
SPB17.4-2019QIR2(S013) or later
Modules in this Course
- Design for Assembly
- Interactive Etch Editing
- Unused Pad Suppression
- Copper Planes
- Intermediate Constraints
- High-Speed Constraint Management
- Reusing Design Constraints
- Differential Pairs
- Glossing
- Testpoint Generation
- Extraction of PCB Editor Views
- Tips and Tricks
- SKILL Commands in the PCB Editor
Audience
- CAD Engineers
- Designers
- Electrical Engineers
- Layout Designers
- PCB Designers
- PCB Layout Designers
Prerequisites
You must have experience with or knowledge of the following:
- Board Layout Design
Or you must have completed the following courses:
- Allegro PCB Editor Basic Techniques.
Related Courses
Please see course learning maps at this link for a visual representation of courses and course relationships. Regional course catalogs may be viewed here.
ONLINE TRAINING
Genus Synthesis Solution v16.1
This online class features the Cadence® Genus™ Synthesis Solution with next generation synthesis capabilities and how SoC design productivity gap is filled by Genus
"This is a great environment for learning, very peaceful and secure. The instructors are knowledgeable and friendly and easy to ask any questions.”
Yogesh Patel, Schneider Electric
"The training was great and satisfying my needs. I especially like the lab and the support of the instructor in doing this lab."
Eslam Sawaby, Valeo
"The course was well prepared and I think that giving us time to do the labs after explanations is a really good way to directly practice our learning. (...) the contents were clear and easy to understand. The teacher was nice and took time for us."
Ruben Guerreiro, Meggitt Sensing Systems
"Very good training."
Hao Li, Incoatec
“Great class, learned a lot. Very well presented, excellent labs with good docs.”
Debra Lefley, Broadcom
“This training was very good. In 15 modules I learned a lot about the PCB Editor, each lesson was finished with some tutorials to practice the work with the tool.”
Volker Rittmann, Incoatec
"Good training."
Fabrice Brossier, Thales Group
"I liked the open discussion about problems in “real life”. I learned good tips and tricks to speed up my daily work."
Florian Hoja, OMICRON
Attendees "(...)found the format Blended Training very comfortable and the interaction very good, especially thanks to sharing the screens." -Blended Training-
Sébastien Vilalte, IN2P3