Best-in-class HDMI Verification IP for your IP, SoC, and system-level design testing.

In production since 2011 on many production designs.

The Cadence® Verification IP (VIP) for HDMI provides a mature, highly capable compliance verification solution for the HDMI Protocol. The VIP for HDMI supports simulation and hardware acceleration platforms making it applicable to intellectual property (IP), system-on-chip (SoC), and system-level verification. The VIP is compatible with the industry-standard Universal Verification Methodology (UVM) and runs on all leading simulators.

The High-Definition Multimedia Interface (HDMI) is an audio/video (A/V) transmission protocol, which is omnipresent in consumer electronics, PC, and mobile products. HDMI supports two kinds of devices: SOURCE, which transmits A/V on HDMI cable, and SINK, which receives and decodes A/V.

Supported specifications: HDMI VIP supports HDMI Protocol versions 1.4b, 2.0a, and 2.1.

HDMI diagram

Product Highlights

  • Supports testbench languages for SystemVerilog, UVM, OVM, and e
  • Dynamic activation and reconfigure the VIP attributes anytime during the simulation
  • Built-in verification plan, protocol checks, and coverage model
  • Inbuilt checks to verify that the DUT agents adhere to the protocol rules defined in the HDMI protocol specification
  • Callback access at multiple TX and RX queue points for scoreboarding and data manipulation
  • Line scoreboarding for better observability of the streams
  • Support for multiple back to back frames with different frequencies

Key Features

The following table describes key features from the specifications that are implemented in the VIP:

Feature Name

Description

3D – Capability

  • Supports various 3D video frame formats

4K x 2K Resolution

  • Supports 4Kx2K video frame formats

3D - Guarantee Interoperability for 25Hz Formats

  • Supports 3D video formats for 25Hz frames

3D - Indication of Independent View

  • Supports configuration of 3D Video extension registers in HDMI LLC Vendor-Specific InfoFrame Packet

3D - Support Dual-View

  • Supports configuration of 3D Video extension registers in HDMI LLC Vendor-Specific InfoFrame Packet

3D - Support OSD Disparity Indication

  • Supports configuration of 3D Video extension registers in HDMI LLC Vendor-Specific InfoFrame Packet

21x9

  • Supports all 21:9 video formats defined by CEA-861-F specifications

Audio Extensions

  • Supports 3D Audio and Multi-stream Audio

Custom Frame Formats

  • Supports Custom Frame formats that allow the user to configure frame formats that are DUT specific and not defined in the specification

Character Error Detection (CED)

  • Supports the mechanism for detecting and reporting character errors

Deep Color Modes

  • Supports B24, B30, B36, B48 deep color modes

Direct Data Channel (DDC)

  • Supports the DDC channel, which is used by an HDMI source to determine the capabilities and characteristics of the sink by reading the E-EDID data structure

Expanded Color Spaces

  • Supports different types of extended color space exclusively defined within the HDMI specification

HDMI CTS 2.0 Compliance 

  • Supports HDMI CTS 2.0 compliance checks

HDMI Packets

  • Supports all packet types defined in the HDMI Specification 2.0

HDMI/DVI Mode

  • Supports both HDMI and DVI mode of operation
  • In the HDMI mode of operation, the HDMI frame consists of video data, control data, and packets, while in DVI mode, the HDMI frame consists of video data and control period only

HDR

  • Supports HDR dynamic range and mastering infoframe defined in CEA 861.3
  • Supports HDR Static Metadata Block defined in CEA 861.3

HDCP 1.4

  • Supports different types of HDCP encryption mode, supports Key Selection Vectors for transmitter and receiver
  • Supports transmission and reception of HDCP private keys
  • Supports Authentication bypass
  • Supports both EESS and OESS modes

HDCP 2.2

  • Supports Authentication and Key Exchange (with and without pairing)
  • Supports locality check
  • Supports Session Key Exchange
  • Supports Transmitter/Receiver State Machines
  • Supports Link Integrity Check
  • Supports Encryption (Cipher and Enhanced Encryption Status Signaling)

Pixel Encoding 

  • Supports RGB, YCbCr 4:4:4, and YCbCr 4:2:2 pixel encodings

Error Injection

  • Support for dynamic/random error injection at multiple levels of hierarchy, i.e., Data Island, Video Pixel, Control, etc. for SOURCE VIP. Additional Error Injection scenarios can be generated through VIP callbacks

Scrambling for EMI/RFI Reduction

  • Supports 340Mcsc to 600Mcsc TMDS Character Rate

SCDC

  • Supports SCDC registers
  • Supports Read Request by slave

Source and Sink

  • Supports verification of both Source (TX) and Sink (RX) device types

Serial and Symbol Interfaces

  • Supports Serial and Symbol interface types

TMDS

  • Supports TMDS bit period/TMDS clock-period ration of 1/40

YCbCr

  • Supports 4:2:0 based pixel encoding and frame packing/unpacking

CEC

  • Support for CEC 2.0

Reset

  • Dynamic software reset capability

Fixed Rate Link (FRL)

Supports the following:

  • Operation at 3, 6, 8, 10, and 12Gbps
  • 3/4 Lane Operation
  • FRL Packetization
  • Link Training
  • LTP 1, 2, 4 – 8
  • RS-FEC
  • FRL Character and Super Blocks
  • Data Flow Metering (DFM) – Capacity computation for uncompressed video and variations check for excess FRL bandwidth.
  • Scrambling LFSR
  • 16b/18b coding

FRL Video Transmission

  • Supports uncompressed FRL video transmission 1K, 4K, 5K, 8K and 10K
  • Supports non-standard video frames

仿真测试集合

VIP 附带一个场景测试集合,可轻松评估和部署 VIP

如需更多信息请联系我们

掌握您的工具

教程、文件和当地专家

Cadence 在线支持

通过在线培训、VIP门户、应用笔记和故障排除文章提高您使用Cadence验证IP的效率