Gold standard for JEDEC® eMMC 5.1 memory device for your IP, SoC, and system-level design verification.

In production since 2011 on dozens of designs.

This Cadence® Verification IP (VIP) supports the JEDEC® eMMC standard. The eMMC standard is an industry-leading memory standard for embedded non-volatile storage of system code, software applications and user data. The JEDEC eMMC 5.1 standard defines functionality that focuses on improving the interaction between the host processor and the memory device at the interface, configuration and protocol levels, resulting in potential gains in overall system performance and reliability. The eMMC VIP is compatible with the industry-standard Universal Verification Methodology (UVM), runs on all leading simulators, and leverages the industry-standard Cadence Memory Model core architecture, interface, and use model.

Supported specification: JEDEC eMMC Electrical Standard, Version 4.51 (JESD84-B451), JEDEC eMMC Electrical Standard, Version 5.0, (JESD84-B50) and JEDEC eMMC Electrical Standard, Version 5.1 (JESD84-B51)

eMMC diagram

Product Highlights

  • Hundreds of protocol and timing checkers to easily catch design bugs
  • Checks for proper initialization sequence with mechanism to skip it
  • Hundreds of predefined configurations based on specific memory vendors' part numbers, datasheets, or generic JEDEC definitions available on ememory.com
  • Transaction and memory callbacks for all protocol, model states, and device memory events
  • Error injection capability through user modification of transaction contents
  • Ability to dynamically change configuration parameters
  • Ability to check for errors and change error severity
  • Packet tracker creation for easy debugging
  • Support testbench language interfaces for SystemVerilog and UVM

Key Features

The following table describes key features from the specifications that are implemented in the VIP:

Feature Name

Description

High speed modes

  • 200 MB/s Read and Write operation. HS400 Dual Data Rate Read and Write interface

General eMMC Functionality

  • 48-bit input command format and R1, R1b, R2 response formats
  • CID/CSD/OCR/Ext_CSD registers bit definitions for a subset of eMMC standard bit definitions
  • Voltage range negotiation through CMD1
  • Cache Read/Write operations, Context ID Management functionality, Discard operation, Packed Read and Write operation, Sanitize operation
  • Read and Write operations for large 4Kb sector sizes
  • Command queuing feature
  • Data tag mechanism
  • Enhanced strobe in HS400 mode with "Data Strobe" signal which directs bit transfer on data lines
  • Extended Partition Types operation

DDR Timing

  • Supports Dual Data Rate timing mode for Read/Write operations, reading CID and CSD registers, sending CRC status and Boot acknowledge

Address Mechanism

  • For devices larger than 2GB, the addressing mechanism is switched from byte addressing to sector addressing

Memory Block Protection

  • Support Replay Protected Memory Block functionality and Secure Write protection feature with Authenticated Device Configuration Area

Interrupt

  • High Priority Interrupt mechanism

Power Off Notification

  • Notification mechanism when the host intends to power off the device

Real Time Clock

  • Accepting Real Time Clock Information that the host sends to the card

Simulation Test Suite

MM comes along with a rich testsuite of scenarios for easy MM evaluation and deployment.

Please contact us for further information.

Master your tools

Tutorials, Documentation, and Local Experts

Cadence Online Support

Increase your efficiency in using Cadence Verification IP with Online trainings, VIP Portal, application notes, and troubleshooting articles