Initiator Controller IP for MIPI I3C

Rapidly increasing numbers of sensors creates new design challenges for mobile, automotive, and internet of things (IoT) devices. These design challenges include significantly higher signal count and increased bandwidth requirements. To address these challenges the MIPI Alliance has defined the I3C interface for connecting all the sensors in a system.

The Cadence IP Family for MIPI Protocols delivers area-optimized interface IP with the low power and high performance required for today's leading-edge devices. One member of this family is the Cadence Initiator Controller IP for MIPI I3C.

Compliant with the latest MIPI I3C specification and legacy compatible with I2C, the Controller IP is engineered to quickly and easily integrate into any mobile embedded system-on-chip (SoC) device and expand sensor communication capabilities with better power efficiency.

Developed by experienced teams with industry-leading domain expertise, verified by silicon-proven and mature I2C IP and validated on a FPGA platform to reduce risk for designers, the IP will connect seamlessly to the Controller IP.

The Controller IP is part of the comprehensive Cadence Design IP portfolio comprised of interface, memory, analog, system, and peripheral IP.

The Controller IP is compliant with the MIPI Alliance I3C sensor specification for embedded systems applications enabling the incorporation of more sensors in a device.

This is a soft IP ideally suited for implementation in ASIC SoC designs with increasing numbers and types of sensors. It provides reduced energy consumption and higher performance over legacy designs.

The Controller IP is split into hardware and software functions. The I3C manager handles packet forming and message handling in hardware. It includes an interconnect protocol and support for a 32-bit APB responder mode to access the registers interface and external DMA. There is an optional FIFO to reduce load on the host servicing the I3C interface. It functions primarily as a initiator controller, with optional secondary initiator support.

The IP supports I3C standard-compliant protocols including legacy I2C mode, backward compatible to Fast Mode (FM— up to 400kHz) and Fast Mode Plus (FM+—up to 1MHz), single data rate I3C mode (up to 12.5MHz), and optional High Data Rate (HDR-DDR).

The IP features include I3C common command codes, DAA, in-band interrupts, hot-join request, and current initiator control takeover request support.

The host command interface provides a command interface that can be queued. Commands are sent through the APB interface, with optional payload (write data or read data). Two separate RX/TX data FIFOs enable the controller to have mixed write/read command in the command queue FIFO. Immediate command provides a mechanism to send higher priority commands (CCC commands only).