Cadence is committed to keeping design teams highly productive. A range of support offerings and processes helps Cadence users focus on reducing time-to-market and achieving silicon success. Overview
- Fast compilation and partitioning: up to 75 million gates/hour, with virtually no design size limitation
- Automatic, emulation-like clock tree transformation, supporting unlimited number of user clocks, gated-clock, latch, and internal tri-states
- Single-ended and high-performance LVDS pin multiplexing
- Fully integrated FPGA place-and-route tool, with automatic generation of all constraints and switches
The Cadence® Protium™ FPGA-based prototyping platform is our second-generation advanced FPGA prototyping platform for early, pre-silicon software development, throughput regressions, and high-performance system validation. Expanding the Cadence Verification Suite, the Protium platform improves software development productivity, supports higher capacity, and facilitates faster bring-up compared to its predecessor and to other FPGA-based prototyping solutions.
While FPGA-based prototyping is widely used today, with current prototyping tools, it can be both challenging and time-consuming to implement your design into an FPGA-based prototype. This is partly because you need to make some changes to the register-transfer level (RTL) design and also because there hasn’t been an easy transition available from an existing simulation or emulation environment to the prototype. The Protium platform, based on Xilinx Virtex-7 2000T FPGAs and featuring an advanced implementation and debug software flow, addresses these challenges.
The Protium platform is the next generation of Cadence’s popular Rapid Prototyping Platform (RPP). Both platforms are compatible with the Palladium® XP verification computing platform, Palladium Z1 emulation platform and Cadence SpeedBridge®Adapters, facilitating a fast and smooth transition of an existing emulation environment into a high-performance rapid prototype.
Compared to competitive solutions, the Protium platform reduces prototype bring-up time by up to 70%, shortening the process from months to weeks. The platform supports up to 100 million gates, which is a 4X increase in capacity compared to the first-generation prototyping platform. With a fully automatic software flow, the Protium platform delivers high performance that can be further optimized with user-driven optimizations, essential for early software development. Other Protium features include:
- Automated memory compilation
- External bulk memory support
- RTL name preservation throughout the flow, which minimizes manual FPGA bring-up steps and debug to speed up time to market
- Unique, easy-to-use debug capabilities, including signal monitoring, force/release signal, internal memory upload/download, probes, and cross FPGA triggering
Main Steps in the Protium Flow
Step 1: Import and compile/synthesize the design. The Protium platform uses the Palladium integrated compile engine, which ensures compatibility with simulation and emulation and enables reuse of existing scripts, constraints, clock definitions, memory definitions, and much more. The output here is a netlist that’s optimized for FPGAs with ASIC memories already converted and mapped into FPGA memories.
Step 2: Partition the design into multiple FPGAs. Here, the Protium platform will also convert gate clocks and latches into FPGA-friendly structures, address internal tri-states, add pin multiplexing between the FPGAs, and connect external interfaces, like PCI Express®, Ethernet, and more. This step generates one individual netlist per FPGA for subsequent place and route, as well as a verification model for validating design functionality before the time-consuming place-and-route step. Since debug and potential iterations to achieve prototyping functionality and performance goals are done before the place-and-route step, you can perform multiple iterations a day.
Step 3: FPGA place and route to generate individual bit files for the FPGAs. Set-up for the place-and-route tool is handled automatically, which frees you from dealing with place-and-route constraints, switches, and time-consuming experimentation to get good results.
- Big FPGA Boards for ASIC Prototyping
- Case Studies for Successful FPGA Based Prototyping
- Hardware Solutions for FPGA-based Prototyping
- Hardware Solutions for FPGA-Based Prototyping
- Emulating a Dual-Port 10G/40G NIC on Palladium and RPP
- Hitachi: Faster Bring Up with Protium Platform
- Bluespec Taps Into Rapid Prototyping Platform for Hybrid Prototyping
- Faster HW/SW Debug, Embedded Software Development and System Validation
- New Cadence Products Expand the Verification Suite: Xcelium Parallel Simulator and Protium S1 Platform
- Firmware Development and Pre-silicon Verification with FPGA-based Prototyping
- FPGA Prototyping Enables Rapid Development of Customizable Processors
- FPGA-Prototyping of an Automotive Ethernet based Parking Assist System
- Reduce FPGA-Based Prototype Bring-Up From Months to Days with Cadence Protium S1 Platform
- Taking FPGA-Based Prototyping to the Next Level
- Pedestrian Detection: Cadence Tensilica IVP DSP on Cadence Protium FPGA-based prototyping platform
- Verification Solutions for ARM v7/v8 Based Systems on Chip
- Verifying Freescale's 64-bit Core with Rapid Prototyping Tools
- A Look at Cadence System Development Tools
- Methods2Business Creates MAC Layers Without Compromising on Verification with C-to-Silicon Compiler
Press Releases (2)
- Protium S1 Single-FPGA Board Datasheet
- Palladium Z1 Enterprise Emulation Platform Datasheet
- Cadence SpeedBridge Adapter for USB 2.0 Host Datasheet
- Protium FPGA-Based Prototyping Platform Datasheet
- Cadence SpeedBridge Adapter for Ethernet Datasheet
- Cadence SpeedBridge Adapter for Serial-Attached SCSI (SAS) Datasheet
- Cadence Incisive SpeedBridge Adapter for PCI Express 2.0 Datasheet
- Cadence SpeedBridge Adapter for PCI Express Datasheet
The ability to use the same bring-up flow for Palladium emulation and Protium rapid prototyping allows our design teams to switch seamlessly between the two execution engines, which reduces the prototype bring-up time from months to weeks.
Hideya Sato, Deputy Executive GM, Hitachi, LTD
Get the most out of your investment in Cadence technologies through a wide range of training offerings. We offer instructor-led classes at our training centers or at your site. We also offer self-paced online courses. Overview