SpeedBridge Adapter for PCI Express
Connects an emulated PCI Express design to a full-speed PCI Express device:
- Design can be an end-point device that connects to a PCI Express host platform, or as a root complex device that connects to a PCI Express device, bridge, or switch
- Enables in-circuit emulation of PCI Express designs with up to 16 lanes
- Supports PCI Express 3.0, 2.0, and 1.0
SpeedBridge Adapter for PCI Express 1.0 Datasheet »
SpeedBridge Adapter for PCI Express 2.0 Datasheet »
SpeedBridge Adapter for PCI Express 3.0 Datasheet »
SpeedBridge Adapter for Multi-Ethernet
Connects an emulated multi-Ethernet design to full-speed Ethernet testers and live networks:
- Supports standard interfaces including MII, GMII, XGMII, RMII, RGMII, and SMII
- Requires a universal SpeedBridge chassis
SpeedBridge Adapter for Multi-Ethernet Datasheet »
SpeedBridge Adapter for Universal Serial Bus (USB) Hosts and Devices
Connects an emulated USB device to a standard, full-speed PC:
- Built-in Enhanced Host Controller Interface (EHCI) eliminates the need for a host on the PC
- Supports USB 2.0 protocol with high-speed transactions
- Supports the Universal Transceiver Macro Interface (UTMI) with 4 different interfaces: 8 bit and 16 bit, unidirectional and bidirectional
SpeedBridge Adapter for USB Host Datasheet »
SpeedBridge Adapter for Universal Serial Bus (USB) Devices Datasheet »
SpeedBridge Adapter for USB 3.0 Devices Datasheet »
SpeedBridge System for Audio/Video
Connects to external audio/video data sources to enable data capture, analysis, and real-time playback on a PC monitor:
- Supports video sources such as Center for Communication Interface Research (CCIR), high-definition digital television (HDTV), and common intermediate format (CIF)
- Supports a variety of video formats such as YCrCb, 24-bit RGB, CCIR 656, DTV, and HDTV
- Displays images with user-selected resolutions
- Captures video data in the range of 300KHz
- Streams video data from/to disk
- Supports audio format I2S playback on PC speakers
- Custom video formats available from Cadence Engineering Services
- Supplied with a PC, additional hardware, and custom verification software
SpeedBridge System for Audio/Video Datasheet »
SpeedBridge Adapter for Serial ATA (SATA)
Connects an emulated SATA host to full-speed SATA hard drives:
- Supports 2 full SATA disk drives: 1 internal 3.5" and 1 external disk drive
- Supports either 1.5Gbps or 3.0Gbps for each disk drive
- Complies with SATA 1.0a
- Requires a universal SpeedBridge chassis
SpeedBridge Adapter for Serial ATA (SATA) Datasheet »
SpeedBridge Adapter for Serial SCSI (SAS)
Connects an emulated SAS host to full-speed disk drives, targeted at SAS host controller cards:
- Supports up to 2 disk arrays
- Complies with SAS v1.1
- Requires a universal SpeedBridge chassis
SpeedBridge Adapter for Serial SCSI (SAS) Datasheet »
SpeedBridge Adapter for PCI/PCI-X
Connects an emulated PCI or PCI-X design to a full-speed PCI or PCI-X bus:
- Supports both 32/64-bit PCI and 32/64-bit PCI-X
- Complies with PCI 2.3 and PCI-X 1.0
- Can operate in either PCI or PCI-X mode
- Supports 33MHz and 66MHz PCI-X systems
SpeedBridge Adapter for PCI/PCI-X Datasheet »
SpeedBridge Adapter for ARM Logic Tiles
Connects an ARM Logic Tile to an emulated ARM-based design. Consists of an ARM IP block and the selected ARM Logic Tile:
- Enables early system-level development and software validation of ARM-based designs
- Co-verifies the HW/SW of the emulated design with the ARM processor core
- Can be used in conjunction with ARM's RealView Debugger
SpeedBridge Adapter for ARM Logic Tiles Datasheet »
Universal SpeedBridge chassis
The universal SpeedBridge chassis provides mechanical stability, cooling, and power distribution for up to six SpeedBridge Adapters. It supports the following configurations:
- Up to six SpeedBridge Adapters for Multi-Ethernet
- Up to six SpeedBridge Adapters for SAS
- Three SpeedBridge Adapters for SATA
- Allows a mix of SpeedBridge Adapters
