Home > Tools > System Design and Verification > Cadence SpeedBridge Adapters > Configurations

Email

* Required Fields

Recipients email * (separate multiple addresses with commas)

Your name *

Your email *

Message *

Contact Us

* Required Fields
First Name *

Last Name *

Email *

Company / Institution *

Company Location *

Comments: *

Cadence SpeedBridge Adapters 


In-circuit emulation of designs under real-world operating conditions

Cadence SpeedBridge Adapters enable a full-speed device to be interfaced directly to a design running at emulation speed, reducing risk by helping ensure the design’s correct in-system behavior.

SpeedBridge Datasheets »

SpeedBridge Adapter for Multi-Ethernet
Connects an emulated multi-Ethernet design to full-speed Ethernet testers and live networks:
  • Supports standard interfaces including MII, GMII, XGMII, RMII, RGMII, and SMII
  • Requires a universal SpeedBridge chassis
SpeedBridge Adapter for Multi-Ethernet Datasheet »

SpeedBridge Adapter for PCI/PCI-X
Connects an emulated PCI or PCI-X design to a full-speed PCI or PCI-X bus:
  • Supports both 32/64-bit PCI and 32/64-bit PCI-X
  • Complies with PCI 2.3 and PCI-X 1.0
  • Can operate in either PCI or PCI-X mode
  • Supports 33MHz and 66MHz PCI-X systems
SpeedBridge Adapter for PCI/PCI-X Datasheet »

SpeedBridge Adapter for PCI Express
Connects an emulated PCI Express design to a full-speed PCI Express device:
  • Design can be an end-point device that connects to a PCI Express host platform, or as a root complex device that connects to a PCI Express device, bridge, or switch
  • Enables in-circuit emulation of PCI Express designs with up to 16 lanes
  • Supports PCI Express 3.0, 2.0, and 1.0
SpeedBridge Adapter for PCI Express 1.0 Datasheet »
SpeedBridge Adapter for PCI Express 2.0 Datasheet »
SpeedBridge Adapter for PCI Express 3.0 Datasheet »

SpeedBridge Adapter for Universal Serial Bus (USB) Devices
Connects an emulated USB device to a standard, full-speed PC:
  • Built-in Enhanced Host Controller Interface (EHCI) eliminates the need for a host on the PC
  • Supports USB 2.0 protocol with high-speed transactions
  • Supports the Universal Transceiver Macro Interface (UTMI) with 4 different interfaces: 8 bit and 16 bit, unidirectional and bidirectional
SpeedBridge Adapter for USB Host Datasheet »

SpeedBridge Adapter for Universal Serial Bus (USB) Devices Datasheet »

SpeedBridge Adapter for Serial ATA (SATA)
Connects an emulated SATA host to full-speed SATA hard drives:
  • Supports 2 full SATA disk drives: 1 internal 3.5" and 1 external disk drive
  • Supports either 1.5Gbps or 3.0Gbps for each disk drive
  • Complies with SATA 1.0a
  • Requires a universal SpeedBridge chassis
SpeedBridge Adapter for Serial ATA (SATA) Datasheet »

SpeedBridge Adapter for Serial SCSI (SAS)
Connects an emulated SAS host to full-speed disk drives, targeted at SAS host controller cards:
  • Supports up to 2 disk arrays
  • Complies with SAS v1.1
  • Requires a universal SpeedBridge chassis
SpeedBridge Adapter for Serial SCSI (SAS) Datasheet »

SpeedBridge Adapter for ARM Logic Tiles
Connects an ARM Logic Tile to an emulated ARM-based design. Consists of an ARM IP block and the selected ARM Logic Tile:
  • Enables early system-level development and software validation of ARM-based designs
  • Co-verifies the HW/SW of the emulated design with the ARM processor core
  • Can be used in conjunction with ARM's RealView Debugger
  • Available for the following Logic Tiles:
    -­ARM1136J-S
    -ARM1136JF-S (Floating Point)
    -­ARM1176JZF-S
    -­ARM1156T2F-S
    -ARM926E-J-S
SpeedBridge Adapter for ARM Logic Tiles Datasheet »

SpeedBridge System for Audio/Video
Connects to external audio/video data sources to enable data capture, analysis, and real-time playback on a PC monitor:
  • Supports video sources such as Center for Communication Interface Research (CCIR), high-definition digital television (HDTV), and common intermediate format (CIF)
  • Supports a variety of video formats such as YCrCb, 24-bit RGB, CCIR 656, DTV, and HDTV
  • Displays images with user-selected resolutions
  • Captures video data in the range of 300KHz
  • Streams video data from/to disk
  • Supports audio format I2S playback on PC speakers
  • Custom video formats available from Cadence Engineering Services
  • Supplied with a PC, additional hardware, and custom verification software
SpeedBridge System for Audio/Video Datasheet »

Universal SpeedBridge chassis
The universal SpeedBridge chassis provides mechanical stability, cooling, and power distribution for up to six SpeedBridge Adapters. It supports the following configurations:
  • Up to six SpeedBridge Adapters for Multi-Ethernet
  • Up to six SpeedBridge Adapters for SAS
  • Three SpeedBridge Adapters for SATA
  • Allows a mix of SpeedBridge Adapters
 

 Content Query Web Part ‭[4]‬