I have tried to run IPCM Class-based SystemVerilog example. But there is some errors.
Is the first error urm_version.svh: No such file critical?
And shall I use –incdir to include 'urm_meth.svh', could you please tell me where the file is?
Thanks in advance!!!!!
Full log is listed below (the log file is attached):
> `ipcm_which.sh xbus`/demo.sh
IPCM_HOME is set to: /cad/cadence/IPCM61/lnx86/ipcm
rm -rf *.log *.df waves.shm INCA_libs *~ assertion_summary
Can't open /cad/cadence/IUS61-s003/lnx86/tools/urm/src/urm/sv/urm_version.svh: No such file or directory at -e line 1, <> line 2.
irun -svpp -urm -incdir /cad/cadence/IPCM61/lnx86/ipcm/urm_lib/sv_cb_ex_lib/xbus/sv +TESTNAME=test_read_modify_write +MSG_DETAIL=MEDIUM xbus_tb_top.sv -input ncsim.tcl
irun: 06.10-s003: (c) Copyright 1995-2007 Cadence Design Systems, Inc.
svpp: 06.10-s003: (c) Copyright 2006-2007 Cadence Design Systems, Inc.
Processing file ./xbus_tb_top.sv ...
Processing file dut_dummy.v ...
Processing file /cad/cadence/IPCM61/lnx86/ipcm/urm_lib/sv_cb_ex_lib/xbus/sv/xbus_master_if.sv ...
Processing file /cad/cadence/IPCM61/lnx86/ipcm/urm_lib/sv_cb_ex_lib/xbus/sv/xbus_slave_if.sv ...
Processing file /cad/cadence/IPCM61/lnx86/ipcm/urm_lib/sv_cb_ex_lib/xbus/sv/xbus.svh ...
svpp: *E,MISINCL: include file 'urm_meth.svh' included in file /cad/cadence/IPCM61/lnx86/ipcm/urm_lib/sv_cb_ex_lib/xbus/sv/xbus.svh can not be opened.
Do you need to use -incdir?
irun: *E,SVPPERR: An error occurred during preprocessing of Verilog files. Review the log file for errors with the code *E and fix those identified problems to proceed. Exiting with code (status 255).
make: *** [run_nogui] Error 1
DavyOriginally posted in cdnusers.org by davyzhu