More useful information with respect to shortcut key setting. Originally posted in cdnusers.org by tashirot
The above method by mcatramb91 is also useful, but they are not memorized once Allegro PCB Editor restarts.
Here is the memorized method of alias shortcut key setting.
1. Allegro PCB open -> Command > alias
2. Save as "myenv" to \pcbenv (NO extension)
3. Open the "myenv" with a text editor
4. Turn off the alias command that you want to modify and add a new alias
#alias F6 add connect
alias Insert add connect
# : Turn off mark
5. Overwrite save
6. Restart Allegro PCB
Allegro default alias commands are of small use since these are unmemorable.
For example, alias Shift+F7 = move, alias F6 = add connect, etc.
Just for reference, I have changed commonly-used key to new key as follows.
This makes you allow a series of routing operations with one hand.
#alias F10 zoom in
alias Pgup zoom in
#alias F11 zoom out
alias Pgdown zoom out
#alias SF7 move
alias Home move
#alias SF9 copy
alias c copy