Hi, Originally posted in cdnusers.org by ejlersen
I can get this to work by doing the following
1. Translate the ibis model into dml format using PCB SI or SignalXplorer
2. In Allegro Design Entry CIS (Capture CIS) you add the model name to the part using the SIGNAL_MODEL property.
e.g., from the attached ibis model you can reference the model names ALVC244_DGW, ALVC244_DW, ALVC244_NS or ALVC244_PW depending on the package type.
3. During the Tools, Create Netlist you need to go into setup, edit and add the following line to the [ComponentInstanceProps] section
Now you can create the netlist and the model will be attached to the component providing your paths points to the libraries.
Technical Service Manager
Nordcad Systems A/S