I'm using IC 184.108.40.2060.6.151, with spectre 10.1.1 32bit, and irun 10.20-s076.
I have a design fired up with a config view and I'm trying to minimise the number of signals I save. In one particular cell, I'm unable to save the required nets. WHen i click on the net, CIW shows the following entry:
Warning (MSPS) : (PARA-308) The current configuration doe not include a valid extracted view. This can be caused by the extracted view generated with a version of Divia prior to 5.0.0. If this is the case, please re-extract the veiw with a version of DIVE 5.0.0 or newer.
I'm using a schematic view of the cell of interest, and we use Assura rather than DIVA if we were to use extracted views.
I also noticed at the top of the schematic window in the title bar, it says (out of context). I usually see this when I'm trying to descend into a view, not set by the HED. The cell instance I'm descending into is a 'bus' type instance...one of 11 identical cells, differentiated with a I9<11:0>. But this shouldn't be the case, since I can select signals in another 'bus-annotated' device.