OK, in that case, maybe what you need to do is to create a file (with a
".scs" suffix), containing the following:
modelParamsReport info what=models where=file
Then reference this file using Setup->Model Libraries in ADE. What it
will do is generate a file in the netlist directory which contains the
model info. You can provide the file= parameter to tell it exactly where
to put it if you want (see "spectre -h info" for details).
This will then output the information about which models were used, and
all the parameters.
ADE normally tells spectre to save the same information, but it goes
into a binary result database (you can see this in the results browser)
and this then allows you to annotate model parameters onto the schematic
via the Results->Annotate menu. So you'll see several "info" analyses
in your netlist at the bottom telling to save such information. The
above approach allows you to also save the information to a text file.