Home > Community > Blogs > IC Packaging and SiP > open cavity design tools now avaialable in 16 6
 
Login with a Cadence account.
Not a member yet?
Create a permanent login account to make interactions with Cadence more convenient.

Register | Membership benefits
Get email delivery of the IC Packaging and SiP blog (individual posts).
 

Email

* Required Fields

Recipients email * (separate multiple addresses with commas)

Your name *

Your email *

Message *

Contact Us

* Required Fields
First Name *

Last Name *

Email *

Company / Institution *

Comments: *

Open Cavity Design Tools for IC Packaging Now Available in 16.6

Comments(0)Filed under: IC Packaging and SiP, IC Package, Sigrity, cavity, IC packaging, APD 16.6, packaging, Allegro Package Designer, open cavity, SiP Layout, 16.6In version 16.5 of the Cadence IC package layout tools, we introduced embedded discrete component support. With the 16.6 release, that support has been extended even further. You are now able to define both manual and automatically-managed open cavities in which you can place your dies and die stacks in the SiP Layout tool, while Allegro Package Designer (APD) provides you with manual open cavity creation.

If you design substrates with one or more open cavities, be they laminate, ceramic, or even leadframe packages, 16.6 is the release you definitely want to pick up and try! To learn more about just how easy it is to create and modify your cavities, in addition to how they are integrated into all aspects of your design flow, read on!

Defining Automatic Cavities in the SiP Layout Die Stack Editor

When you have dies that need to be placed into an open cavity of your package substrate, there's no easier tool for doing so than SiP Layout XL. Once you bring your die in, run the die stack editor command.

In 16.6, you have all new controls for specifying the layer that the stack sits on (based on which the tool can compute the depth of the cavity for you). You can also control the clearance from the die stack's extents to the edge of the cavity. For stadium style cavities with exposed bond fingers, setting an expansion value gives you just the right stadium shelf exposure on each new layer of the design.

 

Best of all, if you modify your stack or any of the dies, spacers, or interposers in it, SiP Layout will automatically adjust the cavity outline to maintain your settings. So, you don't need to give a second thought to adjusting the thickness of a dielectric layer, getting an ECO for a die that includes a size change, or even moving the entire die stack to a new position on the substrate. Your cavities will dynamically compensate for all these changes and more!

Wire Bonding to Fingers in Cavities

Not only can you place dies and die stacks into cavities and have those cavities automatically adjust when the stack changes size; you can also bond to fingers exposed on internal layers of the substrate in a stadium style cavity.

All you need to do to start bonding to these cavity-exposed bond fingers is to set the wire bond global setting for finger placement in cavities, as you can see in the image here:

Once you've done that, the system will allow you to define fingers on internal substrate layers, bond to them, and push/shove them. Not only that, you get the full suite of Assembly DRC checks to ensure proper clearances between fingers and cavity edges, too.

Seeing Your Cavities in 3D

Now that you've bonded your cavity-mounted die to fingers on an internal layer, you probably want to admire your handiwork (and verify wire to die and cavity edge clearances in true 3D). Do this by bringing up the 3D Viewer with dielectrics displayed and you'll see not just your die placed at its proper height - you'll see the exact outline of the cavity, as well:

Need to DRC against the cavity outline? No problem! You can define 3D DRC rules for one (or all) of your wire profiles versus the cavity edge and see right away if you have any problems.

Being able to design, view, verify, and simulate your package substrate with the actual cavity shapes cut from the substrate layers gives you even more design options for your next package. So, pick up a copy of 16.6 and try it out for yourself!

Have a comment? We'd love to hear from you!

Jeff Gallagher

Comments(0)

Leave a Comment


Name
E-mail (will not be published)
Comment
 I have read and agree to the Terms of use and Community Guidelines.
Community Guidelines
The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.