Back in the day, when challenged to transfer data faster, we
increased the width of the interface from 8 bits to 16 or from 16 to 32 and so
on. The wider the bus got, the more
challenging timing became. We added
strobes for interface lanes to better manage timing, but faster and wider
buses added more complexity. Somewhere
around 64 bits and 500 MHz (remember PCI-X 533?), we recognized that the trend
could not continue.
Today, with the exception of memory interfaces, multi-gigabit
data transfers are accomplished through serial interfaces. Transceivers now include complex adaptive
equalization that can only be described through software algorithms. To enable simulation, the industry extended
the IBIS modeling specification standard to include an algorithmic modeling
Sigrity Serial Link Analysis is a full-featured serial analysis solution
that includes model extraction, topology generation, and system signal-integrity analysis that supports IBIS-AMI.
The die-to-die topology is modeled in SystemSI. An impulse response of the channel is
convolved with a large bitstream using high-capacity channel simulation, and
then the channel analysis results can be compared to industry-standard
compliance tests, such as PCI Express (PCIe) 3.0.
Grab a cup of coffee and watch the demonstration of our complete
solution that addresses serial link analysis. These simulation results can
be compared to PCIe 3.0 requirements using our compliance kit that ships
Sigrity Serial Link Analysis.
While many signal-integrity engineers focus on final system
verification, you can see from the demonstration the advantages of using the
serial link analysis technology early in the design cycle. While most would say that an 8.0Gbps channel
such as PCIe 3.0 should be implemented in a flip-chip package, this
demonstration shows the flip-chip versus wirebond quality differences. Given
the results, an enterprising signal integrity team may want to continue
tweaking the channel and transceiver in hope that they can implement PCIe 3.0
in a lower cost package and increase profits for their company.
Tell us about your experiences using SystemSI and Cadence
Sigrity modeling and extraction technology!