Home > Community > Blogs > PCB Design > signal integrity analysis of serial data channels a complete solution using allegro sigrity
 
Login with a Cadence account.
Not a member yet?
Create a permanent login account to make interactions with Cadence more conveniennt.

Register | Membership benefits
Get email delivery of the PCB Design blog (individual posts).
 

Email

* Required Fields

Recipients email * (separate multiple addresses with commas)

Your name *

Your email *

Message *

Contact Us

* Required Fields
First Name *

Last Name *

Email *

Company / Institution *

Comments: *

Signal Integrity Analysis of Serial Data Channels—A Complete Solution Using Allegro Sigrity

Comments(1)Filed under: IBIS-AMI, SI analysis and modeling, High Speed, signal integrity, Allegro Sigrity, Serial link analysis, SystemSI

Back in the day, when challenged to transfer data faster, we increased the width of the interface from 8 bits to 16 or from 16 to 32 and so on. The wider the bus got, the more challenging timing became. We added strobes for interface lanes to better manage timing, but faster and wider buses added more complexity. Somewhere around 64 bits and 500 MHz (remember PCI-X 533?), we recognized that the trend could not continue.

Today, with the exception of memory interfaces, multi-gigabit data transfers are accomplished through serial interfaces. Transceivers now include complex adaptive equalization that can only be described through software algorithms. To enable simulation, the industry extended the IBIS modeling specification standard to include an algorithmic modeling interface (AMI).

Cadence's Allegro Sigrity Serial Link Analysis is a full-featured serial analysis solution that includes model extraction, topology generation, and system signal-integrity analysis that supports IBIS-AMI. The die-to-die topology is modeled in SystemSI. An impulse response of the channel is convolved with a large bitstream using high-capacity channel simulation, and then the channel analysis results can be compared to industry-standard compliance tests, such as PCI Express (PCIe) 3.0.

Grab a cup of coffee and watch the demonstration of our complete solution that addresses serial link analysis. These simulation results can be compared to PCIe 3.0 requirements using our compliance kit that ships with Allegro Sigrity Serial Link Analysis.

While many signal-integrity engineers focus on final system verification, you can see from the demonstration the advantages of using the serial link analysis technology early in the design cycle. While most would say that an 8.0Gbps channel such as PCIe 3.0 should be implemented in a flip-chip package, this demonstration shows the flip-chip versus wirebond quality differences. Given the results, an enterprising signal integrity team may want to continue tweaking the channel and transceiver in hope that they can implement PCIe 3.0 in a lower cost package and increase profits for their company.

Tell us about your experiences using SystemSI and Cadence Sigrity modeling and extraction technology!

Team Allegro

Comments(1)

By Norocel Codreanu on November 22, 2013
    I have read the article and watched the video demonstration with high interest, because serial interfaces/data channels are today a very "hot" topic. Based on SystemSI and Allegro Sigrity, the specialist involved in development of high complexity boards with high transfer data rates is able to investigate virtually, in an early design stage, the behaviour of the whole data link, taking into account not only the generator and receiver devices, but also the wire-bonds, connectors, vias a.s.o., which act as impedance discontinuities and can cause problems, especially in the case of multi-gigabit data transfer rates.
    As a conclusion, SystemSI and Allegro Sigrity (modelling, simulation and parameters extraction tools)  act as a solid design support for all PCB specialists involved in high performance/high complexity boards conception and development.

Leave a Comment


Name
E-mail (will not be published)
Comment
 I have read and agree to the Terms of use and Community Guidelines.
Community Guidelines
The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.